This is a real simple lens hood for a camcorder, using a lens hood increases saturation, reduces flaring and improves depth of field…
- Grab a small plastic bottle with a top that is around the size of your camera’s UV filter
- Work out how long you want your hood to be then cut off the base of the bottle with a knife and trim the top section to eliminate all but a few millimetres of the original top of the bottle
- Spray it matte black to reduce internal reflections
- Mount your UV filter in the cut off top and fix it with a few drops of super glue
Quick, simple and effective!
You can visit pages this project cam from via this link
Share This Article :
These icons link to social bookmarking sites where readers can share and discover new web pages.
Related Posts
Every once in a while something comes along that is pure genius, this project is one of those things! Already featured over at hackaday and we thought it was worthy of featuring here as well...
Quality of recording, the fact that it records in black and white and the fact
"The Holga is an inexpensive, medium format 120 film toy camera, originating in Hong Kong in 1982[3], that later came to be appreciated for its low-fidelity aesthetic.
The Holga's cheap construction and simple meniscus lens often yields pictures that display vignetting, blur, light leaks, and other distortions. Ironically, the camera's quality
I'm not holding out much hope for the new knightrider pilot, mostly due to the lack of a Pontiac Trans-AM. At least Glenn A Larson is back as executive producer to give it some form of credibility.
Here's a little behind the scenes article from Muscle Car Blog - featuring
Continuing with our long standing obsession with DIY Projectors we bring you this beast....
It has been constructed by Diyeitor who posts over at the lumenlab forums
Heres a quick rundown of the components used in the projector....
17" LCD Panel
135mm triplet lens
2 15.5" Fresnel Lens
400w HQI Light Source
All this is wrapped up
DIY Projectors are nothing new, people have been making them for years. But recent advances in technology means they are done slightly different nowadays.The early incarnations of these projectors used a CRT Television Set to produce the image, a box was then constructed around the TV with a fresnel (Pronounced
Discussion
Post a comment